Need stamped concrete in Glendale?
Ready to plan a new driveway or patio? Send a short request form and a local provider in our network can follow up with questions and a written quote.
No obligationRequest a stamped concrete estimate
Stamped concrete is regular concrete pressed with patterned mats while it is still soft. The mats leave the look of brick, slate or flagstone. Color goes into the mix or onto the surface. The result is one hard, flat slab that suits patios, walkways, pool decks and driveways, with no grout lines to clean.
Cdlegs Concrete is a referral service. It does not mix, pour or stamp anything. It connects homeowners in Glendale and the Glendale area with independent local providers who do the work. This page helps you read your current slab, understand the process, and ask better questions before you request an estimate. Measure first, photograph what you see, and know when to stop and ask a pro.
Stamped concrete is a one-shot job. The stamping happens while the slab is soft, and you cannot redo it later. So planning matters more than the pattern. Start with the ground, the weather and the old slab. Pick the look last.
Read the slab before you plan anything new. Grab a tape measure and a phone camera, then walk the surface. Look for these:
Hairline cracks are common and often harmless. Photograph them with a coin for scale. Check again in a month.
Rinse the surface. Mark trouble spots with chalk. Measure length and width. Watch where rain or sprinkler water runs. Photos of every corner help a provider quote faster. Light concrete driveway repair, like filling a hairline crack, can buy time. It will not fix a slab that has sunk or flaked.
Stop and ask a provider if a crack runs into a wall corner, a step has dropped, or a door sticks near the slab. Movement near the house may be a foundation problem. Foundation repair experts should look at that before any new concrete flatwork goes down.
First the provider clears the old surface, grades the ground and packs down a gravel base. Forms go up along the edges. Next comes the pour, which gets leveled and smoothed. Before it hardens, a release powder goes on so the mats will not stick. Workers press the mats into the surface to print the pattern. Later the slab is cleaned and sealed.
Color can be mixed into the whole batch or applied on top as a stain or powder. Mixed color runs all the way through, so chips show less. Surface color gives a richer, layered look. Many providers use both together.
Ashlar slate, random flagstone, brick herringbone and wood plank are common picks. Sand, tan, charcoal and soft gray blend well with stucco homes. Warm browns suit older bungalows. Ask to see photos of finished jobs in daylight, not just small samples.
Patios and walkways are the classic spots. Pool decks, entry porches and driveways work too. Many 1950s to 1980s tract homes have a plain back slab, which makes a natural spot for one of the stamped concrete patios you see in photos. A driveway needs a thicker slab and firmer base than a patio does. Sloped areas need care, since a sealed surface can get slick when wet. Ask about a slip-resistant additive.
Long dry stretches sound perfect, but hot, dry air makes concrete set fast. That shrinks the time to stamp. Providers often start early in the day and use methods to slow the set.
Rain on fresh concrete can pit and wash out the surface. Providers watch the forecast and move the date. Book early so there is room to shift.
During wildfire smoke seasons, ash can settle on a wet slab or fresh sealer. Ask how your provider handles that. Near the coast, mild temperatures often give a calmer work window.
Request a callback to check provider availability for the season you have in mind.
Pavers are single stones set in sand. If one sinks, you lift it and reset it. Stamped concrete is one solid slab, so there are no joints for weeds. It often costs less to install than pavers, but a cracked slab is harder to hide. Pavers cope well with shifting soil. Stamped concrete suits flat, well-prepped ground. Ask a provider to walk you through both.
Most patios take a few working days, plus time to cure. Removal and base prep come first. Pouring and stamping happen in one long session. Foot traffic is usually fine after a couple of days. Cars often wait a week or more, and sealing may wait a few weeks. Your provider will give the real schedule.
Sealer protects color and blocks stains. Many surfaces need a fresh coat every two to three years. Rinse the slab, let it dry fully, then ask your provider if you should reseal it yourself or hire it out.
Ask for photos of stamped work that is a few years old, not only fresh jobs. Ask how they place control joints, since joints guide where cracks happen. Ask about base depth, sealer type and weather plans. Ask them to confirm license and insurance where required. Get the quote in writing. Measure twice, request once.
Brick, slate, flagstone and wood-plank looks, picked from real photos before any concrete is poured.
Mixed-in color, surface stain and sheen levels, chosen to suit your home and sunlight.
Removal of the old slab, grading and a packed gravel base for a steadier surface.
A protective coat plus simple care tips so color stays rich and stains stay out.
These are typical U.S. ranges and they vary by job, site access, pattern and local pricing. Use them for planning only, and ask each provider for a written quote.
| Item | Typical range | Notes |
|---|---|---|
| Plain broom-finish slab | $6 – $12 per sq ft | Handy baseline for comparing |
| Basic stamped patio | $12 – $18 per sq ft | One color, simple pattern |
| Multi-color stamped driveway | $15 – $25 per sq ft | Thicker slab, more prep |
| Old slab removal | $2 – $6 per sq ft | Depends on thickness and rebar |
| Base prep and grading | $1 – $4 per sq ft | More for poor or sloped soil |
| Sealer, first coat | $1 – $3 per sq ft | Resealing comes every few years |
Fill out the short estimate form with your address, project type and the look you have in mind.
Add pictures of the area and rough length and width so quotes fit your space.
Line up scope, materials, sealer and timing side by side before you decide.
Pick a date with your provider that leaves room for rain or heat.
Learn the process and warning signs first, so quotes make more sense to you.
Requests go to independent providers who work in your area.
Send photos and measurements once instead of repeating yourself to many companies.
Requesting an estimate does not commit you to hiring anyone.
Ready to plan a new driveway or patio? Send a short request form and a local provider in our network can follow up with questions and a written quote.
No obligationAcross the U.S., stamped concrete often runs about $12 to $25 per square foot. Pattern, color, thickness, site access and old slab removal all change the total, so ask for a written quote.
Any concrete can crack as it dries and as the ground shifts. Providers cut control joints so cracks tend to follow neat lines. Good base prep and sealer help. Hairline cracks are common, but wide or uneven ones deserve a closer look.
Pick a stretch of mild, dry weather. Rain can ruin a fresh surface, and very hot air makes concrete set too fast. Book early and keep a flexible date.
Ready to plan a new driveway or patio? Send a short request form and a local provider in our network can follow up with questions and a written quote.
No obligation